First Generation Lytro Camera - 4: General Control Dock

    • Delete all pictures on the first generation Lytro Camera: Swipe up on the touchscreen, and touch the "gear" icon. Select "Delete all." Then touch "Delete" and confirm. To exit, touch the "X" in the upper-right corner of the screen, then tap the center of the screen.
delete_all_pictures01.jpg              delete_all_pictures04.jpg              delete_all_pictures02.jpg

 

IMPORTANT: Deleting pictures is permanent. If you have not already transferred these pictures to the Lytro Desktop software, then they are gone for good.

 

    • Check battery level: Swipe up on the touchscreen. The right-hand icon indicates graphically how much battery charge remains.  Tap once to see the exact percentage of battery charge remaining. To dismiss the drawer, tap the center of the screen.
check_battery01.jpg              check_battery02.jpg 

 

    • Check pictures remaining: Swipe up on the touchscreen. The center icon indicates graphically how much internal storage memory remains.  Tap once to see the exact remaining percentage of internal storage memory. To dismiss the drawer, tap the center of the screen.
check_pictures01.jpg              check_pictures02.jpg

 

    • Switch in and out of Creative Mode: When in shooting mode, the left-hand icon in the Dock activates Creative Mode. You will see this square icon turn blue when Creative Mode is active. There will also be a blue border around the entire screen when shooting in Creative Mode. To dismiss the drawer, tap the center of the screen.
creativemode_01.jpg              creativemode_02.jpg

 

 
 

NOTES: The General Control Dock does not offer Creative Mode when you are reviewing pictures on the Lytro camera; instead you are given the option on the left to delete an individual picture. Also, you cannot access the General Control Dock at all while in fast picture review mode; first slide the zoom control or press the shutter to switch modes before accessing the General Control Dock.

TIP: When battery or internal storage memory are running low, a thin red band will appear at the bottom of the touchscreen.

TIP: To check the current Firmware Version on your camera, touch the "gear" icon and then touch "About" at the top of the menu list.

 


TIP: For more info on the Lytro camera features and controls, click here.
 

NOTE: This article applies to the first generation Lytro camera only.

 

 

Comments

Powered by Zendesk