ILLUM - Recovery Screen (Factory Reset, Save Logs, Update)

The recovery screen allows you to perform the following operations:

  1. Reboot the Camera - useful if you decide to do nothing here and just want to reboot
  2. Update from SD Card - for updating camera software, but you'll usually do this from Lytro Desktop or via direct download
  3. Save logs to SD Card - saves any camera error logs to your SD card
  4. Reset to Factory Default - resets all camera settings to factory default

Here's how to boot to the recovery screen:

  1. Remove the SD card
  2. Pull and replace the battery
  3. Press and hold down the 'AF' key (keep holding it down!)
  4. Then press and release the power button
  5. Make sure you don't release the 'AF' key until you see the language options (but do release the power key)
  6. Choose language

From here, you can choose Reset, Save Logs, etc.

Comments

Powered by Zendesk